08.11 / 2026

🌍 العربية · English · Français  |  فيلم البيوت المحمية · agriculture film Greenhouse & Mulch Film for Africa — PO & PE Covers from the Mediterranean to Sub-Saharan Farms Infunplastic supplies UV-stabilised greenhouse film and mulch film to commercial growers, nurseries, and distributors across North and Sub-Saharan Africa — built for intense sun, arid heat, and long commercial cycles. 2Sub-regions 9Ports direct 5-layerCo-extrusion 1994Founded From the Mediterranean coast of Egypt and Morocco to the highlands of Kenya and the farms of Nigeria and South Africa, our PO and PE covers are built for extreme UV, arid heat, and sand-laden winds. Why African Growers Choose Our Film Much of Africa runs on intense solar load, high daytime temperatures, and — in the north and along the Sahel — abrasive wind-borne dust. Surface-treated film fails early under that combination. Our 5-layer co-extruded film carries UV stabilisers and anti-fog agents inside the resin, so performance holds for the full service life instead of degrading after one hot season. ☀️Extreme solar loadHigh-grade UV stabilisers built into the resin for multi-season life under strong sun. 💧Highland humidityBuilt-in anti-fog (PO) for equatorial highland zones (Kenya, Ethiopia). 🌱Long commercial cyclesPO film lasts 3–5 years versus 1–2...

View More

08.11 / 2026

🌏 Tiếng Việt · Bahasa · ไทย  |  màng nhà kính · filem rumah hijau Greenhouse Film for Southeast Asia — PO & PE Covers for Tropical & Monsoon Farms Infunplastic supplies UV-stabilised greenhouse film and mulch film to commercial growers, nurseries, and distributors across Vietnam, Thailand, Indonesia, the Philippines, and Malaysia — built for year-round humidity, intense sun, and monsoon cycles. 5Countries served 8Ports direct 5-layerCo-extrusion 1994Founded From the humid lowlands of the Mekong to the monsoon coasts of Indonesia and the Philippines, our PO and PE covers are built for constant humidity, strong equatorial UV, and long commercial production cycles. Why Southeast Asian Growers Choose Our Film Most of the region runs on tropical or monsoon climates with year-round UV and high humidity. Standard film degrades fast under that load, and surface anti-fog coatings wash off after a single wet season. Our 5-layer co-extruded film carries UV stabilisers and anti-fog agents inside the resin, so performance holds for the full service life. ☀️Intense equatorial UVUV stabilisers built into the resin — not a surface coat that washes off in the monsoon. 💧Constant humidityBuilt-in anti-fog (PO) keeps condensation off the crop through the wet season. 🌱Year-round productionPO film lasts...

View More

08.11 / 2026

🌍 Türkçe · Русский  |  sera filmi · плёнка для теплиц Greenhouse & Mulch Film for Turkey and the Caucasus Infunplastic supplies greenhouse film and mulch film to growers, nurseries, and distributors across Turkey and the Caucasus — specified for each climate zone, from the Mediterranean coast to the mountain valleys. 4Climate zones 7Ports & rail 5-layerCo-extrusion 1994Founded From the Mediterranean coast to the continental highlands and the mountain valleys of the Caucasus, our PO and PE covers are specified for each climate zone. Regional Climate & Need Turkey spans Mediterranean, Aegean, Black Sea, and Central Anatolian climates — so one film does not fit all. The Caucasus adds sharp altitude and continental swings. We match UV grade, insulation, and thickness to each zone so growers get the longest service life per lira. 🌞Mediterranean sunWarm, humid coast → anti-fog; long vegetable cycles favour PO. ❄️Cold Anatolian wintersBig day-night swings → thermal PO film for insulation. 🏔️Caucasus altitude & frostStrong UV + frost → max UV grade and superior insulation. Climate-Based Selection Guide ZoneRecommended filmThicknessWhy Mediterranean coast (Antalya, Mersin)PO anti-fog150–180 µWarm, humid → anti-fog; long veg cycles Central Anatolia (Konya, Ankara)PO thermal180–200 µCold winters, big day-night swing → insulation Black Sea...

View More

08.11 / 2026

🌎 Español · Português  |  película para invernadero · filme para estufa Greenhouse Film for Latin America — PO & PE Covers for Growers from Mexico to Brazil Infunplastic supplies UV-stabilised greenhouse film and mulch film to commercial growers, nurseries, and distributors across Latin America — built for strong sun, high humidity, and long commercial cycles. 6Regions served 7Ports direct 5-layerCo-extrusion 1994Founded From the high-UV Andes to the humid tropics of Brazil and Central America, our PO and PE covers are built for long cycles, intense sunlight, and variable humidity. Why Latin American Growers Choose Our Film Most of the region runs on tropical or subtropical climates with year-round UV and high humidity. Standard film degrades fast under that load. Our 5-layer co-extruded film carries UV stabilisers and anti-fog agents inside the resin, so performance holds for the full service life instead of washing off after one season. ☀️Intense year-round UVUV stabilisers built into the resin — not a surface coat that washes off. 💧High humidityBuilt-in anti-fog (PO) keeps condensation off the crop in tropical zones. 🌱Long commercial cyclesPO film lasts 3–5 years versus 1–2 seasons for economy PE. Climate-Based Selection Guide Region / climateRecommended filmThicknessWhy Brazil (São Paulo /...

View More

08.05 / 2026

  Factory Capability · Updated 2026 Plastic Film Manufacturing Process From Raw Materials to Reliable Film Solutions When global buyers search for plastic film, most are really looking for a roll at the right price. But the buyers who build stable supply chains look deeper: they want a plastic film manufacturer that controls its own production, not a trading desk that re-sells someone else’s output. This page explains, step by step, how professional film is actually made — and what each step tells you about the reliability of the supplier behind it. 1994 Manufacturer since 3 & 5 Layer co-extrusion Per-batch In-house lab QC ISO 9001 Quality certified Production facts stated above reflect the actual system described in this guide — not a generic claim. The Problem Why the Manufacturing Process Matters for Buyers Many buyers shortlist suppliers by price alone. But two rolls with the same quoted thickness can perform worlds apart — because film quality is decided long before it reaches the warehouse. It is decided on the production floor, by five controllable factors: Raw materials. Resin grade and the additive package set the ceiling of performance. A cheap, off-spec resin cannot be corrected later in the line....

View More

07.29 / 2026

  Buyer’s Guide · Updated 2026 How to Choose the Right Plastic Film for Your Business: A Complete Guide for Global Buyers Choosing the right plastic film for your business is rarely as simple as picking the cheapest roll on the quote sheet. Global buyers — greenhouse operators in Southeast Asia, construction contractors in Africa, packaging distributors in South America — repeatedly tell us the same story: the film arrived, but it tore too early, yellowed under the sun within one season, or simply did not match the agreed specification. This guide distils the practical experience of a manufacturer operating since 1994 into a five-factor framework you can use to evaluate any plastic film supplier before you commit a full container load. 1994 Manufacturer since 3 & 5 Layer co-extrusion Per-batch In-house lab QC ISO 9001 Quality certified Data reflects the production system described in this guide — not a generic claim. The Problem The Real Problems Global Buyers Face Most film failures are predictable. They show up in five recurring patterns we see across import markets: Wrong thickness selection. A film specified in “mm” by the buyer and produced in “mil” by the factory can be 25× off in...

View More